Joystick drift or jump (in-game movement only)
There are four flower pots in total. (Two per simulator). They should be cleaned first, and replaced only after use. The entire simulator with the mechanism can be replaced, or only the potentiometers can be replaced.
These potentiometers may not be properly centered after replacement. You will need to rotate them to solder them to the correct center position. For PCBs without plated holes, you can bend down to cover the pins, which will make it easier. In extreme cases, you will need to cut off the corner positioning pins.
Use two types of rods, green can-type ALPS and orange can-type. Due to the rod size, you can only replace green with green and then orange with orange.
